Gutenberg: Introducing high-speed 3D printers:
-More than 10 times faster than conventional products-
-Laying can be done 3-4 times faster than before-
Gutenberg: Tokyo
We have developed a “3D printer with significantly faster stacking speed than before”.
Aiming for “utilization in small-lot, high-mix manufacturing of parts”.
The strength is speed:
A 3D printer that has the advantage of being able to create complex structures from a single component.
The number of applications for high value-added products has increased.
Laminating speed:
The Fused Deposition Modeling (FDM) method is a mechanism that “stacks while cooling in stages”.
Therefore, it takes a long time to manufacture the structure.
3D printer G-ZERO
G-ZERO is a product that solves this problem.
The key is. It is a weight reduction of the “extruder” that melts and discharges the material.
Printhead speed:
Maximum reaching speed is about 500 mm / sec,
The maximum acceleration is up to 20,000 mm / sec, speeding up.
G-ZERO processing capacity:
“More than 10 times faster than conventional products”
“Laying can be done 3-4 times faster than before”
Modelable area:
250 mm x 210 mm x 200 mm
Manufacture of small quantities and many varieties:
With conventional 3D printers, time cost has been an issue.
By stacking faster than before, we will bring out a cost advantage.
Selling price:
For 1 million yen (excluding tax)
75 units are scheduled to be sold in 2022.
Sales will increase to 200 units in 2023.
New switch
Gutenberg : Présentation des imprimantes 3D haute vitesse :
-Plus de 10 fois plus rapide que les produits conventionnels-
-La pose peut se faire 3 à 4 fois plus vite qu’avant-
Gutenberg : Tokyo
Nous avons développé une “imprimante 3D avec une vitesse d’empilage nettement plus rapide qu’auparavant”.
Viser “l’utilisation dans la fabrication de pièces en petits lots et à grande variété”.
La force est la vitesse :
Une imprimante 3D qui a l’avantage de pouvoir créer des structures complexes à partir d’un seul composant.
Le nombre de demandes de produits à haute valeur ajoutée a augmenté.
Vitesse de laminage :
La méthode FDM (Fused Deposition Modeling) est un mécanisme qui “s’empile en refroidissant par étapes”.
Par conséquent, la fabrication de la structure prend beaucoup de temps.
Imprimante 3D G-ZERO
G-ZERO est un produit qui résout ce problème.
La clé est. C’est une réduction de poids de “l’extrudeuse” qui fond et décharge la matière.
Vitesse de la tête d’impression :
La vitesse d’atteinte maximale est d’environ 500 mm/sec,
L’accélération maximale peut atteindre 20 000 mm / s, en accélérant.
Capacité de traitement G-ZERO :
“Plus de 10 fois plus rapide que les produits conventionnels”
“La pose peut se faire 3 à 4 fois plus vite qu’avant”
Zone modélisable :
250 mm x 210 mm x 200 mm
Fabrication de petites quantités et de nombreuses variétés :
Avec les imprimantes 3D conventionnelles, le coût du temps a été un problème.
En empilant plus rapidement qu’auparavant, nous ferons ressortir un avantage de coût.
Prix de vente:
Pour 1 million de yens (hors taxes)
75 unités devraient être vendues en 2022.
Les ventes passeront à 200 unités en 2023.
Nouvel interrupteur
Gutenberg: Einführung von Hochgeschwindigkeits-3D-Druckern:
-Mehr als 10 Mal schneller als herkömmliche Produkte-
-Die Verlegung kann 3-4 mal schneller erfolgen als bisher-
Gutenberg: Tokio
Wir haben einen „3D-Drucker mit deutlich schnellerer Stapelgeschwindigkeit als bisher“ entwickelt.
Angestrebt wird der „Einsatz in der Kleinserien-High-Mix-Fertigung von Teilen“.
Die Stärke liegt in der Geschwindigkeit:
Ein 3D-Drucker, der den Vorteil hat, komplexe Strukturen aus einem einzigen Bauteil erstellen zu können.
Die Zahl der Anwendungen für Produkte mit hoher Wertschöpfung hat zugenommen.
Laminiergeschwindigkeit:
Das Fused Deposition Modeling (FDM)-Verfahren ist ein Mechanismus, der „stapelt, während er in Stufen abkühlt“.
Daher dauert es lange, die Struktur herzustellen.
3D-Drucker G-ZERO
G-ZERO ist ein Produkt, das dieses Problem löst.
Der Schlüssel ist. Es ist eine Gewichtsreduzierung des “Extruders”, der das Material schmilzt und austrägt.
Druckkopfgeschwindigkeit:
Die maximale Reichweite beträgt ca. 500 mm / Sek.
Die maximale Beschleunigung beträgt bis zu 20.000 mm/sec, Beschleunigung.
G-ZERO Verarbeitungskapazität:
„Mehr als 10-mal schneller als herkömmliche Produkte“
“Das Verlegen geht 3-4 mal schneller als bisher”
Modellierbarer Bereich:
250 mm x 210 mm x 200 mm
Herstellung kleiner Mengen und vieler Sorten:
Bei herkömmlichen 3D-Druckern waren die Zeitkosten ein Problem.
Indem wir schneller als bisher stapeln, werden wir einen Kostenvorteil herausholen.
Verkaufspreis:
Für 1 Million Yen (ohne Steuern)
75 Einheiten sollen 2022 verkauft werden.
Der Absatz wird bis 2023 auf 200 Einheiten steigen.
Neuer Schalter