Japan toys: Made by Horikawa Toys ★ NASA Space Capsule
Japan toys:
It is a space capsule made by Horikawa Toy, which seems to be around 1965.
I repaired and revived the immovable item.
The parts to be repaired are the motor and the battery box.
It is completely disassembled, except for the drive part, and car wax is applied to prevent rust (also inside).
Since the internal wiring was also hardened, I replaced everything except the wiring for the wheat ball on the monitor.
The plastic of the battery box was dry and cracked, so even a thin crack is hardened from the inside with plastic repair.
The grease inside the motor was dirty and hardened, so it is disassembled and cleaned.
The size is about, but the length is 235mm, the width is 140mm, and the height is 120mm.
★ Showa Retro, Tinplate, Things of the Time, Space, Vintage-Yahoo! Auctions!
https://page.auctions.yahoo.co.jp/jp/show/description?aID=t1009322210
There is a video! !! ★ Daishin Kogyo Apollo Moon Lander ★
It is an Apollo moon lander of Daishin Kogyo sold around 1970.
It runs mystery while blinking the lamp with two C batteries.
I repaired the immovable item.
The main repair is the contact part of the battery box. (See photo)
Orange clear parts on the left side of the hull
Since there is no such thing, a thin aluminum plate is attached, and one propeller on the left front is damaged.
The aluminum plate is not a beautiful process, so please take a closer look at the photos and videos.
The lower part (power part) of the main body is tin, and the others are made of plastic.
The size is about 190 mm in height and 135 mm in width.
Showa Retro Vintage-Yahoo! Auctions!
https://page.auctions.yahoo.co.jp/jp/show/description?aID=n1009325195